Installing the printer Driver - Printer disconnected & powered off
NB : The Printer can be connected to the PC but must be powered off first before following these steps
1. Get the Driver Software & config file from the following Link Fujitsu DL3100
2. Run the exe and it will extract the software to a folder called DL3100. Run the exe DLSELECT.EXE
3. Select the top option of Install the printer driver for Fujitsu DL3100 and click ok
4. The following window will appear which you can press OK to
5. On the Select a printer driver Window select “Add a Printer Driver package” and set the language to English. Leave Use a network port unticked. Then Press OK
6. The following Window will appear. Follow the instructions
7. Power on the Printer and it should then install. Check in Devices and Printers to see if you can see the printer installed.
Once you have confirmed the printer has been installed then Click OK to the Window shown above.
If the printer was powered on & connected while the driver was installed
1. Go to Device and Printers and find the Fujitsu DL3100. If it is under Unspecified, then the driver hasn’t attached to it.
2. To attach the driver right click on the printer and go to Properties
3. Select the hardware tab, select the Fujitsu DL3100 under Device Functions of Type “Software Device” and then click Properties.
- Go to the Driver tab and click Update Driver
5. On the window that follows select “Search Automatically for Drivers” and the printer should pick up the correct Driver
